Description
Features
• High cycle and service life
• 1C High-performance lithium battery
• Internal Battery Management System
• Excellent high-temperature performance
• High energy density and conversion efficiency
• Can be configured in 12V, 24V, 36V or 48V in series
• BMS protects internal cells and ensures smooth operation
• Easy drop-in replacement for old lead acid battery installs
• Built-in protection for over-charge, over-discharge & over-temperature
• Compatible with most UPS & Inverters using AGM/VRLA charge setting
• Perfect replacement Lithium solution for upgrading your lead acid installation
• Can parallel up to 16 batteries in 48V configuration. 4 in series and 4 in parallel
Specifications:
Model Hubble S-100A
Rated Capacity (5HR) 100 Ah
Nominal Voltage 12.8 V
Discharge Ending Voltage 11.0 V
Charging Limited Voltage 14.4 V
Max. Charging Current 100 A
Max. Continuous Discharging Current 100 A
Cell C Rating 1.0 C
Weight Approx. 10.5 Kg
Configuration 4 in series with 4 banks in parallel for maximum of 16 batteries
Parallel Parallel connection is up to 4 strings
Dimensions (W x D x H) 305mm x 170mm x 220 mm
Maximum DC Limits Maximum 100 Amp Charge per bank & 100Amp discharge per bank
Cells 1st LiFe Prismatic LiFePO4
Design Life +/- 15 years
Cycle Life @ 1C +/- 4 000 Cycles
Certification CE, UN38.3, GBT31484-2015, GBT31485-2015, GBT31486-2015
Outer Package Material Black Polypropylene Plastic
Operating Temperature Charging: 0 to +55°C | Discharging: -20 to +55°C | Storage: -20 to +55°C
Protection Electronic Circuit Breaker, BMS Voltage Protection, Under Voltage Protection
IP Rating IP65
To ensure optimal performance of your battery, please note the following:
- The battery’s BMS will cut off if your inverter’s cut-off voltage is lower than 11.2V, which will cause the battery to die and require a jumpstart. As a result, the Hubble battery is not compatible with Mecer 1200va/2400va inverters (any modified sinewave inverter) it only works with inverters that can set the cut-off to 11V or higher.
- We recommend pairing this battery with a 1kW Mecer Pure sine wave inverter for the best results. You can find the recommended inverter here: https://loadshedbuddy.co.za/product/mecer-1000w-pure-sine-wave-12v-inverter-600w-pwm-solar-controller-sol-i-ax-1vp-axpert-vp-1000-12/
- When connecting two batteries in series, it’s essential to use a balancer to ensure equal charge distribution. You can purchase a balancer here: https://loadshedbuddy.co.za/product/victron-battery-balancer-24v-48v-series-or-parallel-connected-batteries/
- Please set the bulk, float, and cut-off voltages to the following values for optimal performance:
- Bulk: 14V
- Float: 13.6V
- Cut-off: 11.2V
Reviews
There are no reviews yet.